advanced customized characterization technology

 
Product World Sensor & Actuator Products
200 / 400 V Amplifier


  Technical Data (200V version)

Power supply AC 110 / 220 / 240 V, 50/60 Hz ±10%, max. 110 W (factory set)
Fuse rating (2 pcs.) 500 mA T (slow blow) 220 / 240 V 5x20mm (1 A T for 110 V version)
Output voltage max. ± 200 V (± 400 V)
Output current ± 100 mA (min. ±50 mA)
Output resistance (approx.) 100 Ω
Power bandwidth (-3 dB) min. 100 kHz , small signal min. 200 kHz
Slew rate min. 100 V/µs
Input voltage ± 5 V (± 10 V)
input impedance about 1 MΩ
Amplification 40 V/V ± 0.2 %
Voltage monitor output max. ± 5 V , 1/40th of output voltage at terminal
± 0.2 %, ± 5 mV , max. 5 mA
Disable input open or high level -> disable
shorted or low level -> enable,
Input impedance: about 7 kΩ
Environment Temperature 0...40°C, RH 0..60 % non-condensing, max height 2000 m
above sea level, indoor use only, pollution category 1
Dimensions (approx.) W 30 cm/ L 30 cm /H 20 cm
Weight (approx.) 9 kg
200 / 400 V Amplifier
Main Page
Specifications
Product Sheet/ Documentation (PDF)
Quick Links
Online-Request
Contact
Sales Partners
Recommend This Site